Kindly Morrow
Gas Spring Single Monitor Arm, Up to 27"
Free up your desk and position your monitor exactly where your neck wants it. The gas spring mechanism holds any angle you set, from flat-panel portrait mode to tilted back for standing work, without knobs to crank or friction that loosens over time. Built for makers who spend long hours in front of a screen and want their workspace to actually work.
Project idea: Mount your primary monitor on the arm and route a secondary HDMI line to a wall-mounted e-ink dashboard below. With the arm fully extended and rotated, you can swing your main display out of the way during soldering sessions and back into position when you return to the keyboard.
Key Features
- Supports monitors up to 27 inches and up to 8 kg (17.6 lbs)
- Gas spring arm holds position without tightening knobs or manual friction adjustment
- Full range of motion: 360° rotation, tilt, swivel, and height adjustment
- VESA 75x75 and 100x100 compatible mounting pattern
- C-clamp and grommet mount hardware both included
- Cable management channels routed along the arm keep USB and DisplayPort tidy
- Ships from US warehouse, typically 3-5 business days
Frequently Asked Questions
Will this fit my ultrawide or curved monitor?
It supports monitors up to 27 inches with standard VESA 75x75 or 100x100 mounting holes. Most ultrawides above 27 inches use non-standard VESA patterns or exceed the weight limit, so check your monitor's spec sheet before ordering.
How thick does my desk need to be for the clamp?
The C-clamp fits desks up to about 80mm (roughly 3.1 inches) thick. If your desk is thicker or you can't clamp the edge, use the included grommet mount through a desk hole instead.
Does the gas spring need any adjustment out of the box?
There is a tension adjustment screw near the base of the arm. Lighter monitors may need it dialed back a turn or two so the arm doesn't drift upward. Takes about 60 seconds with a hex key.
Frequently Asked Questions
What is included with the Gas Spring Single Monitor Arm, Up to 27"?
The Gas Spring Single Monitor Arm, Up to 27" includes the main product as listed, any accessories shown in the product images, and a quickstart guide. Check the product description above for the full list of included components.
Is the Gas Spring Single Monitor Arm, Up to 27" compatible with Home Assistant?
Compatibility depends on the product type. Every product page at Kindly Morrow includes a compatibility section. Look for supported ecosystems (Home Assistant, Zigbee, Z-Wave, WiFi) in the product description and tags above.
What skill level is the Gas Spring Single Monitor Arm, Up to 27" designed for?
The Gas Spring Single Monitor Arm, Up to 27" by Kindly Morrow is designed to be accessible for beginners. If soldering or advanced setup is required, that is clearly noted in the product description. Our starter kits include step-by-step guides.
