Kindly Morrow
Magnetic Helping Hands with LED Magnifier
Hold your PCB steady, light the joint, and magnify the pad without growing a third arm. This helping hands station uses a heavy magnetic base with five flexible gooseneck arms, alligator clips, and a 3X LED magnifying lamp. No more balancing boards on tape rolls while you try to get a clean solder joint.
Project idea: Use all five arms during a through-hole kit build: two hold the PCB level, one holds the component lead in place, one positions solder wick for cleanup, and the magnifier lets you inspect each joint as you go.
Key Features
- 5 flexible gooseneck arms with alligator clips: hold boards, wires, and components exactly where you need them
- 3X LED magnifying lens: inspect solder joints and read SMD markings without a separate loupe
- Heavy magnetic steel base: stays put on your bench, won't tip when you reposition arms
- Gooseneck arms hold their position: bend once, they stay. No spring-loaded drift
- LED light integrated into the magnifier: eliminates shadows on your work area
- Magnetic base surface holds small parts: screws, resistors, and jumper wires stay put instead of rolling away
- Works with PCBs and panels up to standard hobby sizes: clips grip board edges firmly
Frequently Asked Questions
Is the magnetic base strong enough to hold a heavy PCB without tipping?
Yes. The steel base is weighted for stability. Standard hobby PCBs (up to roughly 150x100mm) sit comfortably with multiple arms extended. For larger or heavier boards, keep the arms positioned closer to the base center to maintain balance.
What powers the LED magnifying lamp?
The LED runs on USB or batteries depending on the version. USB is more practical for bench work since you always have a port nearby. The LED is bright enough for detail work without creating harsh glare on shiny solder joints.
Can the alligator clips hold wires and connectors, not just PCBs?
Absolutely. The clips grip anything from thin 22AWG wire to JST connectors to small panels. They are rubber-tipped on most models to avoid marring delicate surfaces. For very fine wires, wrap them once around the clip jaw for a more secure hold.
Frequently Asked Questions
What is included with the Magnetic Helping Hands with LED Magnifier?
The Magnetic Helping Hands with LED Magnifier includes the main product as listed, any accessories shown in the product images, and a quickstart guide. Check the product description above for the full list of included components.
Is the Magnetic Helping Hands with LED Magnifier compatible with Home Assistant?
Compatibility depends on the product type. Every product page at Kindly Morrow includes a compatibility section. Look for supported ecosystems (Home Assistant, Zigbee, Z-Wave, WiFi) in the product description and tags above.
What skill level is the Magnetic Helping Hands with LED Magnifier designed for?
The Magnetic Helping Hands with LED Magnifier by Kindly Morrow is designed to be accessible for beginners. If soldering or advanced setup is required, that is clearly noted in the product description. Our starter kits include step-by-step guides.
