Sunton
ESP32-S3 Touch Display (LVGL Ready)
Put a capacitive touchscreen on your next project without wiring a single ribbon cable. This ESP32-S3 board comes with an integrated LCD and touch panel, pre-configured for the LVGL graphics library. Design custom dashboards, build a Home Assistant wall panel, or prototype a touch UI in a fraction of the time it takes with separate components.
Project idea: Build a wall-mounted Home Assistant control panel that shows room temperatures, controls lights, and displays your 3D printer status over MQTT.
Key Features
- Capacitive touch + LCD in one unit: no driver boards, no ribbon cable nightmares
- LVGL graphics library support: production-quality UIs with buttons, charts, sliders out of the box
- ESP32-S3 with WiFi + Bluetooth: pull live data from APIs, MQTT, or Home Assistant
- Program via Arduino IDE or PlatformIO: extensive community examples and LVGL demos available
- USB-C connection: power and flash from one cable
- Enough GPIO broken out for sensors, relays, or I2C peripherals alongside the display
- Retail price under $40: cheaper than buying an ESP32 and display separately
Frequently Asked Questions
Can I use this board with SquareLine Studio for drag-and-drop UI design?
Yes. SquareLine Studio exports LVGL-compatible code that runs on this board. Design your layout visually, export, and flash. It cuts UI development time significantly compared to hand-coding every widget.
Does this work with ESPHome for Home Assistant integration?
ESPHome has growing LVGL support as of 2025. You can configure basic displays and touch input through ESPHome YAML. For more complex UIs with animations or custom widgets, flashing LVGL firmware directly via Arduino or PlatformIO gives you full control.
Frequently Asked Questions
What is included with the ESP32-S3 Touch Display (LVGL Ready)?
The ESP32-S3 Touch Display (LVGL Ready) includes the main product as listed, any accessories shown in the product images, and a quickstart guide. Check the product description above for the full list of included components.
Is the ESP32-S3 Touch Display (LVGL Ready) compatible with Home Assistant?
Compatibility depends on the product type. Every product page at Kindly Morrow includes a compatibility section. Look for supported ecosystems (Home Assistant, Zigbee, Z-Wave, WiFi) in the product description and tags above.
What skill level is the ESP32-S3 Touch Display (LVGL Ready) designed for?
The ESP32-S3 Touch Display (LVGL Ready) by Sunton is designed to be accessible for beginners. If soldering or advanced setup is required, that is clearly noted in the product description. Our starter kits include step-by-step guides.
